OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B3D

B Camshaft Profile Actuator B Control Circuit Low Bank 2

P2B3D: the control wire of the second exhaust-side profile actuator on bank 2 (camshaft B, actuator B) has contact with ground. Publicly documented use by a manufacturer is not known. For comparison, GM's L3B diagnostics define the bank 1 code P2B3A as a ground short of at most 0.5 Ω with the driver on and four failed tests out of five. Because 13 CCR 1968.2 requires engine control outputs to be monitored for such faults, a V engine with exhaust lobe switching on both banks would need this code. Look for chafing at brackets and valve cover edges or for a shorted coil. The exhaust valves on bank 2 then keep their current lift profile, and any function that relies on switching there is unavailable.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 3D

Possible causes

  • Wire chafed at a bracket or valve cover edge on bank 2 high
  • Shorted coil in exhaust actuator B medium
  • Oil or water in the connector low

Symptoms

  • Check engine light on
  • Bank 2 exhaust stays on one lift profile

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B3D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication