P2B3C
B Camshaft Profile Actuator B Control Circuit/Open Bank 2
This code reports an interrupted control circuit at actuator B on the exhaust camshaft (camshaft B) of bank 2. No vehicle manufacturer is known to use P2B3C in public documents. Its bank 1 twin P2B39 appears in GM's tables for the 2.7-litre L3B, an inline engine without a second bank, where an impedance of 200 kΩ or more with the output on counts as open. Audi's later 2.0 TFSI applies its valvelift system to the exhaust valves, which shows that exhaust lobe switching is in production, but that engine also has a single bank. CARB's requirement for circuit monitoring of output components is the basis. An unplugged connector, a broken lead or an open solenoid coil will stop the exhaust sleeve on bank 2 from moving.
Possible causes
- Connector of the bank 2 exhaust actuator unplugged or loose high
- Broken lead to the actuator medium
- Open coil in exhaust actuator B medium
Symptoms
- Check engine light on
- Exhaust lift on bank 2 no longer switches
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B3C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.