P2B3A
B Camshaft Profile Actuator B Control Circuit Low Bank 1
P2B3A points to a short to ground in the control line of exhaust-side actuator B on bank 1, i.e. the second pin solenoid that slides the lobe sleeve along camshaft B. GM documents it for the L3B four-cylinder in its 2019 and 2025 OBD tables: driver on, a resistance to ground not above 0.5 Ω, 4 of 5 samples, supply over 11 V, Type A with immediate MIL. Unlike its neighbours, P2B3A is missing from the code list of bulletin PIT5677, which prints P2B39 twice instead, yet the harness chafing over the camshaft carrier described there produces exactly this kind of ground fault. With the exhaust sleeve stuck, the engine loses part of its lift switching. Open and short to power are P2B39 and P2B3B.
Possible causes
- Engine harness rubbed through where it crosses the camshaft carrier high
- Shorted turns in exhaust actuator B medium
- Oil wicking into the actuator connector low
Symptoms
- Check engine light on immediately
- Exhaust profile and cylinder deactivation no longer switch
- With harness damage often further codes and rough running
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B3A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.