P2B38
A Camshaft Profile Actuator B Control Circuit High Bank 2
P2B38 marks a short to battery voltage in the control circuit of intake camshaft actuator B on bank 2. No published manufacturer documentation uses it; only the bank 1 version P2B35 is covered, by GM's L3B summary tables, which check with the output off and react to 0.5 Ω or less towards supply. Engines with two banks and stepped valve lift, such as V6 designs with sliding cam pieces on the inlet side, are the only possible carriers. Under the CARB rules for output components, a short to high voltage has to be recognised and reported. A pinched wire touching a live circuit or a solenoid with an internal short are the likely findings; the second bank then keeps its current cam profile instead of switching.
Possible causes
- Pinched or chafed control wire touching a powered circuit high
- Internal short in actuator B medium
- Faulty output stage in the engine module low
Symptoms
- Check engine light on
- Bank 2 intake lift no longer changes, uneven power delivery
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B38
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.