OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B37

A Camshaft Profile Actuator B Control Circuit Low Bank 2

Code P2B37 stands for a control line shorted to ground at intake-side actuator B of bank 2, the second lobe-switching solenoid on camshaft A of the other cylinder bank. Publicly, no maker assigns it to a vehicle. The bank 1 analogue P2B34 is defined by GM for the L3B four-cylinder, which flags a ground short at 0.5 Ω or less while the output is on; a V engine would need a mirror-image test for its second bank. The regulation (13 CCR 1968.2, comprehensive components) demands detection of such short circuits on output components. Typical causes are a harness rubbed through on the cylinder head or water and oil in the connector. With a grounded control line the actuator cannot work reliably, and lift switching on bank 2 is lost.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 37

Possible causes

  • Harness to the bank 2 actuator chafed through on the cylinder head or a bracket high
  • Oil or water in the actuator connector medium
  • Shorted winding in actuator B medium

Symptoms

  • Check engine light on
  • Lift switching inactive on bank 2, less power or more fuel use

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B37

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication