OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B36

A Camshaft Profile Actuator B Control Circuit/Open Bank 2

P2B36 describes an open control circuit at the second profile actuator of the intake camshaft (camshaft A) on bank 2. A second bank exists only on V or boxer engines. No manufacturer documents this code publicly: the one known user of the series, GM's L3B, is an inline four and only sets the bank 1 code P2B33, where it treats 200 kΩ or more with the driver on as open. V engines with cam-lobe switching do exist, for example Audi's V6 with the valvelift system acting on the intake valves, but their fault codes are not published. CARB requires that output components be checked for circuit continuity and shorts. An open actuator means its cam sleeve cannot change position, so this bank runs without lift switching.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 36

Possible causes

  • Actuator connector on bank 2 unplugged, loose or corroded high
  • Open coil in actuator B medium
  • Broken control wire between engine module and bank 2 medium

Symptoms

  • Check engine light on
  • Bank 2 intake stays on one lift profile, possibly uneven running between the banks

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B36

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication