P2B34
A Camshaft Profile Actuator B Control Circuit Low Bank 1
On bank 1 the intake camshaft (A) carries a second shifting solenoid, actuator B, which GM's L3B 2.7-litre four labels actuator 2. P2B34 reports a short to ground on its control line: while the driver is switched on, the ECM measures 0.5 Ω or less from signal to ground and stores the fault after 4 failed out of 5 samples at more than 11 V, lighting the MIL at once (Type A). GM bulletin PIT5677, later 21-NA-149, names P2B34 among the codes a damaged engine harness can produce when it rubs through on the camshaft carrier or near the left shock tower; fuses may blow as well. The cam sleeve then cannot be shifted, so the engine runs without lift change or cylinder deactivation. The open circuit has its own code, P2B33.
Possible causes
- Engine harness chafed through on the camshaft carrier or near the left shock tower (GM PIT5677) high
- Shorted turns or short to housing in actuator B medium
- Oil or moisture in the actuator connector creating a path to ground low
Symptoms
- MIL on, often together with other codes from the same harness section
- Lift switching and cylinder deactivation unavailable
- With a chafed harness also rough running, reduced power or blown fuses
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B34
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.