OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B32

Fan 2 Stuck On

With P2B32 the controller finds that the second radiator fan keeps operating, or does not change state, against its command. On conventional cars this usually traces back to a relay stuck closed, a fan 2 control line shorted to its active level or a module that has lost control of the motor. Audi documents P2B32 for the RS e-tron GT and the plain e-tron GT of model years 2022 to 2024 as symptom 59342 in thermal management J1024: debris entering via the wheel housing liner blocks the fan, which leads to poor cabin climate, reduced drive power or incomplete charging; the cure is a revised fan, shroud and liner set for the affected side. CARB requires fan outputs to be checked for correct reaction to commands. A fan that never stops may also drain the 12 V battery. P2B31 covers fan 2 doing too little, P2B30 fan 1 stuck on.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 32

Possible causes

  • Debris from the wheel housing jamming fan 2 (Audi e-tron GT) high
  • Fan 2 relay stuck closed medium
  • Fan 2 control line shorted to its active level low

Symptoms

  • Fan audible after the vehicle is switched off
  • Reduced heating, cooling or charging on electric vehicles
  • Flat 12 V battery after parking

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B32

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication