OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B2E

Engine Coolant Temperature Sensor 5 Circuit High

P2B2E is stored when the fifth coolant sensor shows a resistance so high that only an open circuit, an unplugged connector or a line shorted to voltage can explain it; the NTC curve would put the coolant below −60 °C. GM sets it once the channel exceeds about 298 kΩ in the 2019 L3B tables or about 174 kΩ in the 2025 ECM tables, for 5 s within 6 s, after an engine run time above 10 s or with intake air above −20 °C; Type B, MIL after two trips. As with sensor 4, GM's table names the radiator coolant sensor in this row although the low fault is assigned to sensor 5. GM bulletin 21-NA-149 includes P2B2E among the results of chafed engine harnesses on 2019–2021 light-duty pickups. Supplier NTN-SNR's catalogue has it as an excessive sensor 5 signal. The grounded case is P2B2D.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 2E

Possible causes

  • Open signal or ground wire, or unplugged connector high
  • Chafed engine harness interrupting the circuit medium
  • Open sensor 5 element medium

Symptoms

  • MIL after two trips
  • Sensor 5 reads around −40 °C or lower in live data
  • Engine runs on a substitute temperature value

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2B2E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication