P2B2D
Engine Coolant Temperature Sensor 5 Circuit Low
A low signal from coolant sensor 5 means its NTC resistance has collapsed, which the engine computer would read as an impossibly hot engine; a grounded signal wire or a shorted element is the usual reason. GM documents P2B2D in its configurable temperature input system: the sensor 5 channel fails when its resistance drops below 47.5 Ω in the 2019 L3B tables or 55 Ω in the 2025 ECM tables, a value tied to roughly 150 °C, for 5 s within a 6 s window; Type B, MIL on the second trip. GM bulletin 21-NA-149 lists P2B2D among the codes that chafed engine harnesses produce on 2019–2021 Silverado and Sierra 1500 trucks. NTN-SNR calls it signal too low for sensor 5. Fans may run at full speed until repair. P2B2E is the reverse fault.
Possible causes
- Signal wire grounded, for example by a chafed harness high
- Shorted sensor 5 element medium
- Engine control module input fault low
Symptoms
- MIL after two trips
- Radiator fans running constantly at high speed
- Other harness-related codes stored at the same time
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2B2D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.