P2B29
Hybrid/EV Battery Pack Coolant Pump A Overspeed - Dry Run
A centrifugal pump that suddenly spins faster while drawing less current has lost its liquid: it is churning air. P2B29 reports exactly this for battery coolant pump A. Porsche describes the detection for the 2018 Panamera 4 E-Hybrid, where the pump watches its speed and current draw against the commanded speed and reports a dry run to the battery controller, but files it as P0C4A00 and notes it may take hundreds of miles to appear. Ford uses P2B29 itself: bulletins 20-2221 (2020 Escape HEV built up to 10 June 2020, stored in the BECM), 20-2293 and 20-2345 (hybrid Explorer, Aviator and Police Interceptor Utility) list it among MIL codes cured by reprogramming. Outside such software cases, look for leaks, low level or poor bleeding. P2B28 is the general performance code.
Possible causes
- Air in the battery coolant loop after service or incomplete bleeding high
- Leak in a battery cooling line lowering the level medium
- Battery controller software misjudging pump feedback (Ford 2020 hybrids) medium
Symptoms
- MIL or hybrid system warning
- Pump audibly gurgling or whining
- Battery power or charging limited
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B29
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.