P2B28
Hybrid/EV Battery Pack Coolant Pump A Performance
P2B28 means battery coolant pump A is electrically reachable but does not perform as the battery controller expects. VW and Audi store P2B2800 in battery management J840: VW bulletin 93-21-02 (2021 ID.4) traces it to air left when pump V590 did not run during the fill-and-bleed routine, and Audi's 2068363 series (Q4 e-tron 2022–2024, message Electric drive fault) names dry running from residual air, prescribes two bleed runs with the battery at 3–35 °C and replaces V590 only if the entry stays static. FCA lists P2B28 with MIL on the Jeep Wrangler eTorque mild hybrids (2.0 L, 3.6 L) and reflashes the battery pack module or hybrid control processor. Thresholds are not published. The dry-run code is P2B29, a stalled pump P0CFF.
Possible causes
- Residual air in the battery coolant loop, often after service high
- Battery or hybrid controller software needing an update medium
- Worn or failing battery coolant pump medium
- Low coolant level from a leak low
Symptoms
- Electric drive fault message or MIL
- Reduced drive or charging power
- Short or missing engine auto-stops on mild hybrids
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B28
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- static.nhtsa.gov/odi/tsbs/2021/MC-10202585-0001.pdf
- static.nhtsa.gov/odi/tsbs/2022/MC-10227024-0001.pdf
- static.nhtsa.gov/odi/tsbs/2023/MC-10243974-0001.pdf
- static.nhtsa.gov/odi/tsbs/2023/MC-10242799-9999.pdf
- static.nhtsa.gov/odi/tsbs/2023/MC-10242800-9999.pdf
- law.cornell.edu/regulations/california/13-CCR-1968.2