P2B27
Hybrid/EV Electronics Coolant Temperature Sensor C Circuit High
P2B27 is logged when sensor C in the power electronics coolant loop sends a signal near the top of the reference, which the controller would have to read as deep frost. Far more often than real cold, the reason is a circuit that has opened: a connector that has backed out, a terminal pushed out of its cavity, a broken wire near a moving part or a failed element; shorting to the battery feed is rarer. No manufacturer documents P2B27 publicly; NTN-SNR names an excessive sensor C signal. As an order of magnitude, GM flags its sensor A above 98 % of the reference (P0CF1). CARB counts these sensors as monitored inverter cooling inputs. Unlike the low fault, a cold reading can hide real heat, so the controller usually switches to a substitute value and limits power. P2B26 is the grounded counterpart.
Possible causes
- Connector backed out, terminal pushed out or wire broken high
- Sensor C element open medium
- Signal line shorted to battery voltage low
Symptoms
- Warning lamp and hybrid system message
- Sensor C shown far below outside temperature in live data
- Limited electric power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B27
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.