P2B25
Hybrid/EV Electronics Coolant Temperature Sensor C Circuit Range/Performance
P2B25 is the plausibility code for the third electronics coolant sensor. The signal is electrically sound, but its value cannot be right, for example because sensor C still reads cold while sensors A and B in the same loop have long warmed up, or because it jumps by an amount the coolant could not follow. No manufacturer publishes a set condition for P2B25. NTN-SNR describes it as a deviation or malfunction of the sensor C signal, and CARB asks for rationality checks on inverter thermal management inputs. GM's after-soak comparison for sensor A (P0CEF) illustrates the method. A sensor C that sits near a component with its own heat, such as the charger, can also mislead the test if the pump has stopped or the loop holds air. Electrical faults of sensor C go to P2B26 and P2B27.
Possible causes
- Sensor C reading drifted away from the true temperature high
- Air in the loop or a weak pump leaving sensor C without flow medium
- Corrosion in the sensor C connector medium
Symptoms
- Fault code set after a cold start or a long drive
- Cooling system reacting inconsistently
- Possible limitation of charging power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B25
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.