OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B24

Hybrid/EV Electronics Coolant Temperature Sensor C Circuit

Some electrified drivetrains measure the power electronics coolant at three points, for example ahead of the inverter, behind it and at the charger or DC/DC converter. P2B24 covers the third of these sensors, C, and reports a circuit fault the controller does not classify further. Which component sensor C watches is not standardised and varies by make. No manufacturer documents P2B24 publicly. NTN-SNR lists the code as an electrical fault in the sensor C circuit. CARB treats every input that serves the inverter's thermal management as a monitored component, so an open or shorted line has to be caught. More specific results for the same sensor are P2B26 (low) and P2B27 (high). With one of several readings missing, controllers usually carry on with the remaining sensors but may lower power limits.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 24

Possible causes

  • Connector or wiring fault in the sensor C circuit high
  • Failed sensor C element medium
  • Input stage of the evaluating module faulty low

Symptoms

  • Stored fault code, possibly with a hybrid system message
  • Lower charging or drive power in hot conditions

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B24

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication