OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B22

Hybrid/EV Electronics Coolant Temperature Sensor B Circuit Low

P2B22 says the signal voltage of electronics coolant sensor B has fallen below its valid band. Since these sensors are NTC thermistors, a low voltage would mean an absurdly hot coolant, so the usual explanation is a signal wire touching ground, moisture bridging the connector or an internally shorted element. No manufacturer documents P2B22 publicly; NTN-SNR's catalogue calls it a too-small signal of sensor B. GM's 2019 HPC2 table shows typical numbers for the matching sensor A code P0CF0: below 4 % of the 5 V reference (0.2 V) for 4 s within 5 s, with more than 10.2 V supply, Type B. CARB requires such out-of-range checks on inverter cooling inputs. Because a hot value is taken seriously at first, the pump runs harder and power can be limited. P2B23 is the opposite case.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 22

Possible causes

  • Sensor B signal wire chafed through and shorted to ground high
  • Water or coolant in the sensor connector medium
  • Internally shorted sensor element medium

Symptoms

  • Warning lamp or hybrid system message
  • Electronics coolant pump and fans running at high output
  • Reduced electric drive or charging power

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B22

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication