OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B20

Hybrid/EV Electronics Coolant Temperature Sensor B Circuit

Sensor B is a second temperature sensor in the coolant loop that serves the hybrid or EV power electronics, such as inverter, DC/DC converter or on-board charger; where it sits relative to sensor A is up to the vehicle maker. P2B20 is the undifferentiated circuit code: the controller finds the signal unusable without deciding between low and high. No manufacturer documents P2B20 publicly. Supplier NTN-SNR lists it in its coolant sensor catalogue as an electrical fault in the sensor B circuit, and CARB requires every input of inverter thermal management to be checked for circuit faults. GM's handling of sensor A (P0CF0/P0CF1 in its 2019 HPC2 table) shows the usual NTC logic behind such checks. Without the reading, the system tends to cut inverter and charging power.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 20

Possible causes

  • Loose connector, corroded pins or broken wire in the sensor B circuit high
  • Sensor B element open or shorted internally medium
  • Faulty input stage or reference supply in the controlling module low

Symptoms

  • Hybrid or EV system warning and stored fault code
  • Reduced drive or charging power as a precaution
  • Electronics coolant pump running more often or at higher speed

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B20

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication