OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B1F

Cylinder 8 Injection Pulse Offset Exceeded Learning Limit

P2B1F is the last code of the series: the offset learned for injector 8 has crossed the learning limit. Ford uses it on the 6.7 L V8 Power Stroke. For 2023–2025 F-Super Duty trucks, special service message 53896 links these codes to driving above 762 m; when symptoms are present the minimum fuel mass adaption of all cylinders is reset with FDRS, and if the fault persists, section 303-04 of the workshop manual takes over. The principle behind it is CARB's rule for diesel fuel feedback in (f)(4.2.4)(A)(iii): a fault once the control has used up its adjustment range. A GM patent on small-quantity learning describes the same idea with two codes per cylinder, one for negative and one for positive drift. P2B1E is the not-learned partner.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 1F

Possible causes

  • Adaption skewed by high-altitude driving (Ford SSM 53896, reset with FDRS) high
  • Injector 8 worn or coked medium
  • Outdated PCM calibration low

Symptoms

  • Malfunction indicator lamp on
  • Slightly rough idle in some cases, otherwise normal running

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B1F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication