P2B1E
Cylinder 8 Injection Pulse Offset Not Learned
P2B1E means injector 8 has not received a learned pulse offset. As the final cylinder in the group it belongs to V8 engines; Ford's 6.7 L V8 would be the obvious candidate, but Ford publishes only the exceeded-limit code P2B1F for it, so no manufacturer source for P2B1E exists. CARB leaves the time allowed for learning to the manufacturer: per (f)(4.2.4)(A)(i) a fault exists when feedback control has not begun within that interval. Because an eight-cylinder needs one learned set per injector and pressure level, GM patented an extrapolation of values to shorten the learning time. In service the code mostly points to a learn that was reset or never had suitable coasting phases; only if it comes back under good conditions do injector 8, its wiring or the crank signal come into question.
Possible causes
- Learn values reset or injector 8 replaced, learn not finished high
- Few coasting phases with fuel cut-off in everyday use medium
- Fault in the crank speed signal or the injector 8 wiring low
Symptoms
- Warning lamp
- Mostly no noticeable change in running
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B1E
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.