OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B1A

Cylinder 6 Injection Pulse Offset Not Learned

P2B1A reports that the pulse offset for injector 6 has not been learned. Public manufacturer sources do not name this code; on the 3.0 L V6 Power Stroke built by Ford, where cylinder 6 is the last one, Ford's summary lists only the exceeded-limit code P2B1B. CARB explains why such learning exists in diesel engines: since 2010, sections (f)(4.2.2) and (f)(4.2.3) demand checks that the right fuel quantity arrives at the right crank angle, and where no failure could push emissions over the threshold, reaching the control limits serves as the criterion instead. An unlearned offset means that pilot quantities on cylinder 6 rest on nominal data only. Few symptoms beyond the lamp are to be expected; the cure is completing the learn under suitable driving, then checking injector 6 if it never succeeds.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 1A

Possible causes

  • Learn for injector 6 still pending after a reset or parts replacement high
  • Mostly short trips with a cold engine, so the learn rarely starts medium
  • Injector 6 delivering so erratically that no value can be fixed low

Symptoms

  • Warning lamp
  • Perhaps slightly harder combustion noise at idle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B1A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication