OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B19

Cylinder 5 Injection Pulse Offset Exceeded Learning Limit

P2B19 flags injector 5: its learned zero-fuel offset exceeds the calibrated limit. Ford's diesel OBD summary groups the code with the other odd numbers from P2B11 to P2B1F under the Zero Fuel Calibration monitor, which it files under fuel system feedback control. One distinct trigger is altitude: special service message 53340 covers 2020–2025 F-Super Duty 6.7 L trucks that store these codes when driven above 762 m (2,500 ft). The first step is the service function that clears the minimum fuel mass adaptions of all cylinders with Ford's FDRS tool; Ford told dealers a permanent fix was planned for the second quarter of 2025. CARB counts a fuel feedback loop that has used up its authority as a fault under (f)(4.2.4)(A)(iii).

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 19

Possible causes

  • Learned values skewed by driving above about 760 m (Ford SSM 53340) high
  • Injector 5 with changed opening behaviour medium
  • PCM software without the later calibration fix medium

Symptoms

  • Check engine light after mountain or high-plateau driving
  • Possibly slightly rough idle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B19

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication