OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B16

Cylinder 4 Injection Pulse Offset Not Learned

P2B16 indicates a missing learned pulse offset for injector 4. Public manufacturer material does not tie it to any engine; Ford's published diesel monitor and its bulletins use only the exceeded-limit partner P2B17. Why the learn matters is set out in a Bosch patent: pilot injections are kept as small as possible, and if tolerances mean the injector does not open at all, combustion becomes noticeably louder. A typical trigger for a not-learned state is a fresh start of the learn – after replacing injector 4 or the engine control unit, or after a scan tool reset of the minimum fuel quantity adaption, a step Ford prescribes in TSB 23-2076. Clearing the code before the vehicle has seen suitable driving rarely helps; the conditions for the learn must occur first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 16

Possible causes

  • Injector 4 or PCM replaced, or adaptions reset, and the learn not yet completed high
  • Learn conditions (warm engine, fuel cut-off) rarely reached medium
  • Injector 4 not opening on minimal pulses at all low

Symptoms

  • Warning lamp
  • Louder combustion noise, especially at idle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B16

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication