OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B15

Cylinder 3 Injection Pulse Offset Exceeded Learning Limit

P2B15 reports that the zero-fuel correction learned for injector 3 has reached Ford's limit. For its 3.0 L six-cylinder diesel Ford adds conditions so the test injection takes place in a defined overrun: engine speed between 890 and 2,400 rpm, a gear from fourth to tenth held without shifting, the torque converter locked and the fuel balance wheel learn already finished. For the 6.7 L V8 engine, TSB 23-2076 from Ford (2020–2022 F-Super Duty) blames incorrect learned values after fuel system repairs and prescribes new PCM and TCM software plus the service function that resets the minimum fuel mass adaption for every cylinder, about 0.7 h of labour. A cylinder 3 balance fault (P0269) or injector performance fault (P02F0) should be ruled out first.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 15

Possible causes

  • Learned values unsuitable after fuel system repairs (Ford TSB 23-2076, software and adaption reset) high
  • Injector 3 drifted mechanically (wear, coking, internal leakage) medium
  • Outdated PCM calibration low

Symptoms

  • Malfunction indicator lamp on
  • Possibly knocking or rough running at idle

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B15

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication