P2B13
Cylinder 2 Injection Pulse Offset Exceeded Learning Limit
P2B13 concerns injector 2 on Ford's Power Stroke diesels: its zero-fuel learn value has run past the permitted band. Ford's 2023 OBD summary shows when the learn runs: continuously, typically within about 30 s, with coolant of at least 50 °C, intake air between 0 and 75 °C, fuel of at least 10 °C, at least 10 V supply, almost no pedal (up to 2 %) and rail pressure within 50 bar of its target. A real deviation is not the only trigger, though. Special service message 48877 for 2017–2019 F-Super Duty 6.7 L trucks explains that abnormal steering wheel oscillation can put noise on the crank or cam sensor frequency and set these codes; if they stay away after clearing, no injector work is to be done. Balance code P0266 often appears alongside.
Possible causes
- Steering wheel oscillation disturbing the crank or cam signal (Ford SSM 48877) medium
- Injector 2 with genuinely shifted opening time due to wear or deposits medium
- Implausible learned values in the PCM medium
Symptoms
- Check engine light
- Often no running fault; with a worn injector, knocking or rough idle
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B13
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.