OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B0A

Cold Start Cylinder 3 Injection Pulse Performance

P2B0A stands for missed cold-start pulses on cylinder 3. For the GM 1.2 L LIH with its three cylinders it is the highest cold-start cylinder code, since that engine's 2025 table stops at P2B0A. The same table defines the cold-start window through the summary code P2B95: catalyst below 550 °C, coolant up to 66 °C, 250–3,000 rpm and less than 20 s after start, ending after 500 engine cycles at most – a very short test. Cylinder codes are Type B and decide after 50 to 100 samples. GM bulletin PIP5746 and service update A202310450 (2020–2021 Encore GX, 2021 Trailblazer) both list P2B0A; the cure is ECM reprogramming. Four-cylinder GM engines use the code for their cylinder 3 too. The warm-engine twin is P2B02.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 0A

Possible causes

  • ECM software anomaly on the GM 1.2 L LIH (service update A202310450) high
  • Cylinder 3 injector reacting too slowly when cold medium
  • Injector 3 connector with poor contact low

Symptoms

  • Lamp on, code stored only after a cold start
  • Engine runs normally once warm

Inspection / repair

  • Difficulty: easy
  • DIY: shop recommended

What Pro shows you for P2B0A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication