OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B09

Cold Start Cylinder 2 Injection Pulse Performance

P2B09 reports that while the catalyst is being warmed after a cold start the ECM missed the opening trace of injector 2 on too many commanded pulses. CARB defines the window: at least six hours engine-off, ambient at or above −6.7 °C and coolant no more than 15 °C warmer than ambient. GM already ran the test in 2019 on the 2.7 L L3B, setting it after 100 failures in 380 samples, Type B. For 2021 Malibu, Equinox and Terrain (LYX and LFV engines) GM bulletin 20-NA-230 lists P2B08–P2B0B with P2B95 as a software anomaly: vehicles built before 2 December 2020 get the current calibration, then codes are cleared and a cold start is repeated. If P2B09 comes back, normal diagnosis follows; the warm-engine code is P2B01.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 09

Possible causes

  • Outdated ECM calibration (GM bulletin 20-NA-230) high
  • Cylinder 2 injector not responding to the short cold-start pulses medium
  • Wiring or connector problem on injector 2 low

Symptoms

  • Check engine light after cold starts on two trips
  • Usually no driveability issue once the engine is warm

Inspection / repair

  • Difficulty: easy
  • DIY: shop recommended

What Pro shows you for P2B09

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication