P2B06
Cylinder 7 Injection Pulse Performance
P2B06 is the warm-engine pulse check for cylinder 7 and so practically limited to V8 and larger engines. No manufacturer documents P2B06 publicly in its own entry. In GM's 2025 V8 tables the code appears only in the lists of a shared calibration: a pulse counts as missing when the measured opening magnitude stays below a fixed value of 75 across rail pressures from 0.4 to 24 MPa. The warm per-cylinder faults GM actually reports on that V8 are its offset-learning limits P10AF/P10B0 for cylinder 7. CARB treats the injector as an output part whose response to a command must be verified. Typical follow-up is a misfire count on cylinder 7; the cold-start sibling is P2B0E.
Possible causes
- Cylinder 7 injector with weak or missing armature lift high
- Wiring to injector 7 damaged by heat or chafing medium
- Rail pressure outside the plausible range, distorting the opening signal low
Symptoms
- Engine light on after two trips
- Misfire on cylinder 7 (P0307), rough idle
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B06
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.