OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B05

Cylinder 6 Injection Pulse Performance

P2B05 marks missed injection pulses on cylinder 6 outside the cold-start window; on a six-cylinder engine this is the last cylinder in the order of numbers. No manufacturer documents P2B05 publicly as a stand-alone check. GM's 2025 V8 calibration (25OBDG06A/06B) lists it only in the support tables shared by the pulse family. One of them shows why the check is tied to split injection: double or triple pulses are allowed only up to about 3,000–3,600 rpm, depending on mode and injector energy profile, and per GM's 2018 definitions single-pulse data are evaluated below 5,000 rpm. A fault therefore tends to show at low and medium speed. The injector of cylinder 6 is first suspect, wiring second; the cold-start counterpart is P2B0D.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 05

Possible causes

  • Deposits or wear on the cylinder 6 injector hampering small pulses high
  • Contact problem at the injector 6 plug medium
  • Injector driver or voltage sensing in the ECM faulty low

Symptoms

  • Check engine light
  • Slight shaking at idle or low speed, misfire on cylinder 6 (P0306)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B05

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication