OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B04

Cylinder 5 Injection Pulse Performance

P2B04 extends the warm-running missed-pulse check to cylinder 5, so it only matters on engines with five or more cylinders. No manufacturer documents P2B04 publicly as a monitor of its own. Among GM's 2025 V8 documents it turns up solely inside code lists attached to common calibration maps; the main entries there are the cold-start codes P2B08–P2B0F, while warm small-pulse faults of each cylinder go to GM's own offset-learning codes (P10AB/P10AC for cylinder 5). Where it is used, the idea follows the CARB rule that output parts need a functional check: the controller verifies the injector really opened on command. Which physical cylinder carries number 5 depends on the maker's numbering scheme, so check the engine's layout before pulling parts. Cold-start faults here are P2B0C.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 04

Possible causes

  • Cylinder 5 injector sticking or opening too slowly high
  • Chafed or high-resistance wiring to injector 5 medium
  • Calibration error in the engine software low

Symptoms

  • Engine warning lamp on
  • Rough running or misfire on cylinder 5 (P0305)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B04

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication