P2B03
Cylinder 4 Injection Pulse Performance
With P2B03 the engine module reports that cylinder 4 injection pulses went unconfirmed after warm-up: the coil voltage showed no proof of the armature moving. In GM's lists the code belongs to four-cylinder direct-injection engines – the three-cylinder tables end at P2B02 – and GM's 2025 four-cylinder table needs 50 to 100 samples for a Type B verdict with two trips. GM engineering information PIE0808 (Colorado/Canyon of model years 2023–2024 with 2.7 L) collects P2B03 with the offset-learning limit codes P10A9/P10AA of the same cylinder and the circuit code P02F1; steps are checking the harness near the turbo actuator, unplugging the fuel rail connector for 60 s and a 10-mile test drive. P2B03 also appears in the L3B harness bulletins. Cold start: P2B0B.
Possible causes
- Harness chafed near the turbo actuator or elsewhere on the engine (GM 2.7 L) high
- Poor contact in the fuel rail injector connector medium
- Cylinder 4 injector worn or sticking medium
Symptoms
- Lamp on after the second faulty trip
- Possibly misfire on cylinder 4 (P0304) or under load
- Further injector codes of the same cylinder stored at the same time
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2B03
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.