OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B02

Cylinder 3 Injection Pulse Performance

P2B02 concerns cylinder 3: in warm operation the ECM did not see the voltage bump that marks the cylinder 3 injector actually opening, often enough to count pulses as not delivered. On GM's 1.2 L LIH three-cylinder, cylinder 3 is the last one, and the 2025 table for that family (cylinders 1–3 only) decides after 50 to 100 samples, Type B. GM service update A202310450 for this engine in the Encore GX (2020–2021) and Trailblazer (2021) (about 22,350 US vehicles) lists P2B02 with P2B00, P2B01 and the cold-start codes; the cure is reprogramming the ECM, not new parts. On four-cylinder engines GM also monitors cylinder 3 with this code. Cold-start faults on the same cylinder are P2B0A.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 02

Possible causes

  • ECM calibration with false detections (GM 1.2 L LIH, service update A202310450) high
  • Cylinder 3 injector not lifting reliably medium
  • Damaged injector 3 wiring or connector low

Symptoms

  • Check engine light, often without any driveability complaint
  • On a real injector fault rough running on cylinder 3 (P0303)

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B02

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication