OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2B01

Cylinder 2 Injection Pulse Performance

P2B01 is stored when the ECM keeps missing the opening signature of the cylinder 2 injector in normal running, i.e. it has no proof that fuel was delivered on that cylinder's commanded pulses. GM uses the code on direct-injection petrol engines. The 2019 table for the 2.7 L L3B judges 100 failures out of 380 samples; the 2025 tables reach a verdict sooner, after 50 to 100 samples. Both are Type B with the warning lamp on the second trip. GM's preliminary information PIT5677 to PIT5677E for 2019–2021 Silverado and Sierra 1500 with the L3B lists P2B01 next to P2B00 and P2B03 among dozens of codes that a grounded, chafed engine harness can trigger. A misfire count on cylinder 2 (P0302) helps tell an injector problem from a wiring one; P2B09 is the cold-start version.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberB / 01

Possible causes

  • Engine harness shorted to ground at a chafe point (GM L3B bulletin series PIT5677) high
  • Cylinder 2 injector opening sluggishly or not at all (deposits, worn armature) medium
  • Corroded or loose injector 2 connector distorting the feedback voltage low

Symptoms

  • Warning lamp after two trips
  • Uneven idle, possibly misfire on cylinder 2
  • Together with many other codes and erratic behaviour when the harness is shorted

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2B01

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication