OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2AFC

Engine Coolant Temperature Sensor 4 Circuit

P2AFC is the general circuit code for a fourth engine coolant temperature sensor. Engines with split cooling, electric pumps or separate head, block, radiator and heater circuits carry several such sensors, and how they are numbered is up to each maker. No manufacturer documents a set condition for P2AFC publicly; for the 2019 L3B 2.7-litre engine GM instead assigns separate low and high codes to this sensor (P2AFE, P2AFF). Supplier NTN-SNR describes P2AFC in its coolant sensor catalogue as an electrical defect in the circuit of sensor 4. CARB requires coolant temperature inputs to be monitored for broken circuits and for values outside their range. Expect an open line, a loose plug or a failed NTC element; the engine computer then falls back on a substitute value.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / FC

Possible causes

  • Open wire or loose connector at sensor 4 high
  • Failed NTC element in sensor 4 medium
  • Faulty input stage in the engine control module low

Symptoms

  • Check engine light on
  • Cooling fans running more than usual on substitute value
  • Thermal management in default mode

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2AFC

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication