OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2AF8

Starter Relay D Control Circuit Low

P2AF8 is logged when the control line of starter relay D shows a short to ground. Depending on whether the module switches the coil on its ground side or its supply side, the relay then either sits permanently energised or can no longer be operated. Stellantis lists P2AF8 in STAR case S2108000038 for the 2020–2021 Chrysler Pacifica, among codes such as U0100 and P0627 that arose from spread or bent terminals in the power distribution centre connectors, together with no-start and many electrical complaints; which relay the code covers there is not stated. Beyond that no maker publishes a set condition. For comparison, GM flags 0.5 Ω or less to ground on its starter relay outputs after 8 failures in 10 samples. P2AF7 covers the open line, P2AF9 the short to voltage.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / F8

Possible causes

  • Spread or bent terminals in the power distribution centre connector high
  • Control wire shorted to ground medium
  • Shorted relay coil low

Symptoms

  • No start or no crank
  • Several unrelated electrical faults at the same time
  • Stop-start unavailable

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2AF8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication