P2AF6
Starter Relay C Stuck Off
P2AF6 is the reverse fault on relay C: commanded to switch, the relay does not change state. Stellantis names it Starter Relay 3 Stuck Off, on some Wagoneers Dual Starter Relay Stuck. During an auto-start the PCM energises the relay to split the batteries; if it then finds hardly any gap between the auxiliary and the main battery voltages, the relay evidently stayed put, so P2AF6 is stored with MIL and stop-start shuts down. Bulletin 08-138-23 traced it on 2022–2023 Wagoneers to connector D3157A at the power distribution centre that had not clicked fully into place. The RAM 1500 2025 with the 3.0 L Hurricane and stop-start and later Wagoneers got PCM software that lets the permanent code clear. A drained auxiliary battery can also produce false fails.
Possible causes
- Power distribution centre connector not fully seated high
- PCM software needing an update medium
- Depleted auxiliary battery causing a false fail medium
- Power control relay not switching low
Symptoms
- Check engine light on
- Stop-start disabled
- Occasional failure to restart after an auto-stop
Inspection / repair
- Difficulty: easy
- DIY: possible
What Pro shows you for P2AF6
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.