OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2AF5

Starter Relay C Stuck On

P2AF5 means starter relay C remains in its energised state when it should have dropped out. Stellantis uses it as Starter Relay 3 Stuck On for the power control relay of its dual-battery stop-start system: Jeep Grand Cherokee 2021 to 2025, Wagoneer and Grand Wagoneer 2022 to 2025, RAM 1500 2025, and earlier Pacifica, Durango, Compass, Wrangler and Gladiator. In normal driving the relay is released and closed, so the main battery also charges the auxiliary one; if the PCM still sees a voltage gap between the two above a calibrated limit, it stores P2AF5 and disables stop-start. Owners report no cranking, no start or a dead auto-stop function. Stellantis checks battery terminals, the 150 A fuses and distribution centre connections, and notes false fails with a flat auxiliary battery that a battery disconnect clears.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / F5

Possible causes

  • Loose or corroded B+ connection at main or auxiliary battery high
  • Depleted auxiliary battery causing a false fail high
  • Open or poorly seated 150 A fuse or fuse array medium
  • Power control relay mechanically stuck low

Symptoms

  • No crank or no start
  • Stop-start inoperative, service message for the system
  • Auxiliary battery not being charged

Inspection / repair

  • Difficulty: easy
  • DIY: possible

What Pro shows you for P2AF5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication