P2AF2
Starter Relay C Control Circuit/Open
P2AF2 reports an open or otherwise faulty control line for a third starter relay. Such a relay appears where cranking is split across several switching stages, for instance on stop-start engines. No manufacturer documents P2AF2 publicly. The nearest documented user of relay C is Stellantis, which calls it Starter Relay 3: on Jeep and RAM stop-start models it is the power control relay that cuts the main battery off from the auxiliary one during an auto-start, yet published bulletins only cover its stuck codes P2AF5 and P2AF6. As an analogy for the circuit test, GM treats its tandem starter pinion relay output (P26E4) as open at 200 kΩ or more between signal and ground, after 40 failures in 50 samples of 50 ms, Type B. Shorts to ground and to voltage are P2AF3 and P2AF4.
Possible causes
- Broken control wire or unplugged relay connector high
- Open relay coil medium
- Blown fuse or missing supply to the relay coil medium
- Faulty output driver in the control module low
Symptoms
- Stop-start function disabled
- Occasional or permanent no-crank
- Warning lamp depending on manufacturer
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2AF2
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.