P2AF1
Intake Air O2 Sensor Negative Current Control Circuit High Bank 2
P2AF1 is the high-side fault of the virtual-ground return on the bank 2 intake air oxygen sensor. Lifting this biased line towards supply voltage requires contact with a feed, most often the heater circuit in the same plug, or condensed water inside a connector. Once the return drifts up, the ECM can neither regulate the Nernst cell nor interpret the pump current, so the oxygen share of the bank 2 charge is lost. Ford's 2012 summary files a VM lead shorted to battery on its bank 2 exhaust probes as P0152; an intake sensor equivalent is not documented by any manufacturer, and CARB's comprehensive-component rule is the remaining basis. On a car that sets P2AF1, unplug the sensor and check the return pin against the Bosch pinout before replacing parts. P2AF0 is low, P2AEF open, P2AE8 bank 1.
Possible causes
- Return lead shorted to the heater circuit high
- Condensed water inside a connector medium
- Bias source in the ECM faulty low
Symptoms
- Check engine light on
- EGR on bank 2 reduced, NOx may rise
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2AF1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.