P2AEF
Intake Air O2 Sensor Negative Current Control Circuit Open Bank 2
P2AEF indicates that the return line, or virtual ground, of the bank 2 intake oxygen sensor is open. Both cells of a wide-band element reference this lead, pin 2 (IPN/VM) on the Bosch LSU 4.9, which the ECM biases so current can flow both ways. Ford's 2012 summary describes the bank 2 exhaust analog P2254: if the sensor voltage settles inside a narrow band (1.45-1.55 V with the Bosch CJ125, 1.95-2.05 V with the Conti ATIC42) for 10 s, the return is judged open. Nothing comparable is published for an intake sensor, and no maker documents P2AEF. A second intake sensor exists only where every bank has a separate intake or EGR route. While the return is open, bank 2 EGR loses its feedback; drivers usually see only the lamp. P2AF0/P2AF1 are low/high, P2AEC the open pump lead, P2AE6 bank 1.
Possible causes
- Return lead (pin 2) broken high
- Return contact corroded or loose medium
- Internal break of the common electrode low
Symptoms
- Check engine light on
- Usually no noticeable change in driveability
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2AEF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.