OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2AED

Intake Air O2 Sensor Pumping Current Circuit Low Bank 2

P2AED stands for a pumping current circuit on the bank 2 intake oxygen sensor that reads below its limit. A pump lead grounded on the engine or a breakdown inside the pump cell are the usual reasons. On exhaust probes Ford stores such a short for bank 2 under the general low code P0151 rather than a dedicated pump code, and Saab's 9-5 (2010) expects about 2.8 V on the pump terminal at ignition-on with the sensor disconnected. No manufacturer documents P2AED, and an engine using it would need one intake sensor per bank. If bank 1 reports P2AE4 at the same time, a common cause such as the ECM interface is more likely than two damaged leads. The EGR on bank 2 loses its oxygen feedback, so the ECM limits recirculation. P2AEC is the open, P2AEE the high fault, P2AE4 bank 1.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / ED

Possible causes

  • Pump current lead grounded on the engine high
  • Breakdown inside the pump cell medium
  • ECM sensor interface faulty (likely if bank 1 also reports) low

Symptoms

  • Check engine light on
  • EGR on bank 2 limited, possibly higher NOx

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2AED

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication