P2AEC
Intake Air O2 Sensor Pumping Current Circuit Open Bank 2
P2AEC means the pumping current wire of the second-bank intake oxygen sensor is interrupted. On a Bosch-style element the ECM uses this lead to push oxygen into or out of the measuring gap until the Nernst cell is balanced; the current needed is the oxygen signal. Ford's intake EGR patent US9441564B2 derives the recirculated share from the change in that current relative to operation without EGR, so an open lead removes the whole basis. For bank 2 exhaust probes Ford uses P2240, found by a lambda that hardly moves under test pulses. No manufacturer has published P2AEC or an engine fitted with a separate bank 2 intake sensor. Look first at wiring routed near hot exhaust parts of that bank. P2AED/P2AEE are low/high, P2AEF the open return, P2AE3 bank 1.
Possible causes
- Pump current lead broken, often from heat near bank 2 exhaust high
- Sensor plug loose or not latched medium
- Pump cell inside the sensor open low
Symptoms
- Check engine light on
- EGR on bank 2 without feedback or switched off
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2AEC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.