OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2AE6

Intake Air O2 Sensor Negative Current Control Circuit Open Bank 1

P2AE6 points to an open negative current control line on the bank 1 intake air oxygen sensor. This is the shared return of pump and Nernst cell, which Bosch names virtual ground (IPN/VM, pin 2); Saab's 2010 9-5 shows about 2.5 V on it at ignition-on, a bias that lets the pump current change direction. For the exhaust analog P2251, Ford separates an open VM from an open pump lead: lambda still reacts to reference-current pulses, and with the Bosch CJ125 chip the fault sets when for 10 s the sensor voltage remains between 1.45 and 1.55 V. No manufacturer publishes P2AE6 for the intake sensor. With the return missing, neither cell has a defined reference, the oxygen value is lost and EGR runs without feedback. P2AE7/P2AE8 are low/high, P2AE3 the open pump lead, P2AEF bank 2.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / E6

Possible causes

  • Virtual-ground return lead (pin 2) broken high
  • Corroded or loose return contact in the plug medium
  • Internal break of the common electrode in the sensor low

Symptoms

  • Check engine light on
  • EGR runs without oxygen feedback

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2AE6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication