OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2ADF

Intake Air System Leak Bank 2

P2ADF means the engine control module has concluded that air reaches the cylinders of bank 2 without passing the air measurement. Audi documents the code for the 4.0 litre TFSI V8 in the A8, S8, SQ7, SQ8, RS Q8, RS 6 Avant and RS 7 from model years 2019 to 2023. Drivers notice the check engine or exhaust warning lamp and a whistle from the engine bay; misfire codes for bank 1 and P2279 for bank 1 can be stored alongside. Audi's remedy is a new full-load crankcase breather line serving bank 2, while the oil separators and part-load lines stay in place. On other engines, split intake or boost hoses, leaking manifold gaskets and a stuck crankcase ventilation valve are the usual leak points. P2279 covers the same check for bank 1.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / DF

Possible causes

  • Leaking full-load crankcase breather line on bank 2 (Audi 4.0 TFSI) high
  • Split intake or boost hose on bank 2 medium
  • Leaking intake manifold gasket on bank 2 medium
  • Crankcase ventilation valve not sealing low

Symptoms

  • Check engine or exhaust warning light on
  • Whistling noise from the engine bay
  • Rough idle or misfire codes

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P2ADF

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication