OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2ADE

Reductant Tank Temperature Sensor B Circuit

P2ADE is the general circuit code for reductant tank temperature sensor B, intended for systems that report a fault on this input without splitting it into low, high or erratic. No manufacturer documents P2ADE publicly. GM, where the sensor B family is on record, reports such faults through P2ADB, P2ADC and P2ADD plus the plausibility code P2ADA, and its 2025 DEF controller names exactly those four as the sensor B fault set. Deutz files an open circuit of its second tank temperature sensor at the suction point under its own code P1241 instead. CARB requires emission-related inputs to be checked for open circuits and for readings outside their possible range. Where P2ADE does show up, treat it as an open or unreadable sensor B circuit: inspect connector, wiring and the tank sensor unit.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / DE

Possible causes

  • Open signal line or unplugged tank sensor connector high
  • Failed tank sensor unit medium
  • Input fault in the SCR or engine control module low

Symptoms

  • Check engine light on
  • DEF or SCR warning
  • Possible inducement countdown

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2ADE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication