OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2ADD

Reductant Tank Temperature Sensor B Circuit Intermittent/Erratic

P2ADD judges how the sensor B signal moves over time instead of how high it is. Fluid in a tank warms and cools slowly, so sudden jumps suggest a loose contact or a failing element. GM's 2017 and 2018 diesel tables compare every raw thermistor sample with an envelope that starts at the last good value and widens toward the −55 °C and 155 °C limits as bad samples pile up; 40 failures in 50 samples give a Type A code. In the 2025 DEF controller the tank unit adds up the absolute temperature changes across a window of 14 samples taken every 1.3 s and fails above 6 °C, one fail in three windows being enough; while P2ADB or P2ADC is present this test is suspended. GM also lists P2ADD in bulletin 21-NA-149 on harness chafing with the 3.0 L LM2 diesel.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / DD

Possible causes

  • Loose or corroded contact at the tank sensor connector high
  • Chafed harness with intermittent contact medium
  • Degrading thermistor in the quality or tank sensor unit medium

Symptoms

  • Check engine light that may return after clearing
  • Jumping DEF temperature in live data
  • DEF or SCR warning message

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2ADD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication