P2ADC
Reductant Tank Temperature Sensor B Circuit High
P2ADC is the upper limit check on the same sensor B: the reported DEF temperature is higher than the fluid in the tank could ever get. In GM's 2017 and 2018 diesel calibrations the quality sensor thermistor has to exceed 155 °C in 40 of 50 samples, with cranking finished and more than 11 V at the powertrain relay; the outcome is a Type A code. GM's 2025 DEF controller draws the line much lower at 90 °C, held for 2 s and again computed inside the smart tank unit. GM bulletin 21-NA-149 names P2ADC among the codes that a chafed engine harness produced on 2021 trucks and SUVs with the 3.0 L LM2 diesel. Such a high value usually means trouble in the sensor electronics or its wiring rather than real heat. Too low and unsteady signals are handled by P2ADB and P2ADD.
Possible causes
- Internal fault in the quality sensor or smart tank sensor unit high
- Chafed engine harness disturbing the sensor circuit medium
- Corroded or loose pins at the tank sensor connector low
Symptoms
- Check engine light on
- DEF system message, often together with other harness-related codes
- Possible inducement countdown toward reduced power
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2ADC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.