OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2ADB

Reductant Tank Temperature Sensor B Circuit Low

P2ADB flags a value from the second DEF tank temperature sensor that lies below the lowest temperature the sensor can physically report, so the controller treats it as a circuit fault and not as cold fluid. GM is the documented user. In its 2017 and 2018 diesel tables sensor B is the thermistor inside the DEF quality sensor: a reading under −55 °C in 40 of 50 samples (100 ms task) sets a Type A code, MIL on the first trip. The 2025 DEF controller (25OBDG04A) leaves the range check to the smart tank unit, which sends an error flag over SENT; below −50 °C for 2 s P2ADB is stored. Without a valid value the SCR controller loses one input for managing the tank temperature. The upper limit is P2ADC, unsteady readings are P2ADD.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / DB

Possible causes

  • Defective thermistor in the DEF quality or tank sensor unit high
  • Moisture or DEF crystals in the sensor connector medium
  • Damaged signal or supply wiring to the tank sensor low

Symptoms

  • Check engine light right after the fault is detected
  • DEF or SCR system warning in the cluster
  • Countdown to reduced power or restart lock if left unrepaired

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2ADB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication