OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P2AD6

Reductant Pump Motor Position Sensor Circuit

P2AD6 is the general circuit code of the position sensor in the motor of the reductant (DEF) pump. Modern supply pumps often use a brushless motor whose rotor position must be known for commutation and speed control; a Cummins Emission Solutions patent names a Hall-effect rotor position sensor as one option and back-EMF evaluation as the sensorless alternative. No manufacturer publishes a description of P2AD6. The code covers faults of the sensor circuit itself that are not clearly low or high (P2AD8, P2AD9), for example an implausible or missing pattern. In most designs sensor, motor and electronics form a sealed pump module, so the repair is a new pump unit after the harness and supply have been checked. If the pump cannot be controlled, dosing stops and the SCR warning sequence begins.

SystemPowertrain
Typegeneric / SAE
GroupP2
Range / numberA / D6

Possible causes

  • Position sensor or electronics inside the pump module defective high
  • DEF residue or corrosion in the pump connector medium
  • Missing supply or ground for the pump electronics low

Symptoms

  • Check engine light and SCR warning
  • DEF dosing stops; countdown to speed limitation

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P2AD6

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication