P2AD0
Reductant Temperature Sensor B Circuit Intermittent
P2AD0 stands for short interruptions or jumps in the signal of reductant temperature sensor B. The current title reads circuit intermittent only, without erratic. No manufacturer publishes this test. The closest documented logic is GM's tank sensor check P205E in its 2025 DEF controller, which counts a failure when the value moves more than 4 °C within a ten-sample window and needs three such failures out of nine; sensor A has the corresponding code P2046. Because DEF crystallises when it leaks, a slightly damp connector can produce exactly these spikes; vibration loosening a terminal is the other classic cause. Steady faults are reported as P2ACE or P2ACF instead. Clean and dry the connector, check terminal grip and repeat a wiggle test with live data running.
Possible causes
- Moisture or DEF residue in the sensor B connector high
- Terminal loosened by vibration medium
- Wire breaking intermittently inside the insulation low
Symptoms
- Check engine light that appears sporadically
- Jumping DEF temperature in live data
Inspection / repair
- Difficulty: medium
- DIY: possible
What Pro shows you for P2AD0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.