P2ACE
Reductant Temperature Sensor B Circuit Low
P2ACE means the signal of reductant temperature sensor B lies below its valid voltage band. With the NTC elements used for DEF temperature, a low voltage translates into an extremely hot reading, so a signal line rubbing through to ground, a crushed connector or DEF that has wicked into the plug and bridges the contacts are the usual suspects. No maker publishes a threshold for P2ACE. For sensor A, Deutz lists P2044-00 as a short to ground; GM's 2025 DEF controller sets the low limit of its tank sensor at 0.3 V, roughly 75 °C, which shows the order of magnitude. A false hot value can lead the controller to skip DEF heating in frost, so lines may freeze and dosing stop. Measure the sensor resistance against a temperature table and look for crystallised DEF at the connector.
Possible causes
- Signal wire of sensor B shorted to ground high
- DEF wicked into the connector bridging the terminals medium
- Sensor B internally shorted medium
Symptoms
- Check engine light and SCR warning
- Implausibly high DEF temperature in live data
- Frozen DEF lines in winter
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P2ACE
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.